Product number: HREPPF
Automatic setting of the limit positions
With the push of a button the motor looks out for both of the limit positions and automatically saves them. Additionally the limit positions can also be set manually according to your individual requirements.
Automatic calibration of the limit positions
After 120 cycles - Up/Down movements – the tubular motor eliminates its limit positions and resets them. Due to this function an exact upper limit of the rail is guaranteed. (This function can be deactivated by using the manual limit setting.)
Automatic adjustment of the upper limit into 10°, 20° or 30°
As a standard setting, the motor releases the upper limit position at 20° and is saved to protect your roller shutter from unnecessary wear and tear. (this setting can be adjusted to 10° or 30°, the standard setting is 20°)
Automatic obstacle detection with bounce back function
The motor recognizes obstacles in the downward movement, stopps and releases the obstacle by bouncing back. This feature protects the roller shutter, the motor and the obstacle. (The obstacle detection and/or bounce back function can be deactivated)
Automatic anti-freezing function with bounce back function
The motor recognizes a blockage in the upward movement, e.g. when the roller shutter is frozen. Therefore the motor stops, moves back down and releases the hanging.
5 year warranty on faultless performanceTechnical specifications:
TÜV-Bauart approved
Length without bracket: 558 mm
Motor diameter: 35 mm
Power: 145 W
Rated torque: 13 Nm
Maximum load: 29 kg
Cable length: 2.0 m
For shaft diameter: 40 mm, octagonal shaft
Radio frequency: 433,92 MHz
Radio code: G2