This online shop is using cookies to give you the best shopping experience. Thereby for example the session information or language setting are stored on your computer. Without cookies the range of the online shop's functionality is limited. If you don't agree, please click here.
Product number: 12601-VAR
aluminium
includes 2 metric thread screws and keys
thread length 40 mm
cam-length Ø 10 mm, diameter 10 mm
45° rotation
colour according to product description
UV-resistant plastic base
Product number: HREPPF
Automatic setting of the limit positions
With the push of a button the motor looks out for both of the limit positions and automatically saves them. Additionally the limit positions can also be set manually according to your individual requirements.
Automatic calibration of the limit positions
After 120 cycles - Up/Down movements – the tubular motor eliminates its limit positions and resets them. Due to this function an exact upper limit of the rail is guaranteed. (This function can be deactivated by using the manual limit setting.)
Automatic adjustment of the upper limit into 10°, 20° or 30°
As a standard setting, the motor releases the upper limit position at 20° and is saved to protect your roller shutter from unnecessary wear and tear. (this setting can be adjusted to 10° or 30°, the standard setting is 20°)
Automatic obstacle detection with bounce back function
The motor recognizes obstacles in the downward movement, stopps and releases the obstacle by bouncing back. This feature protects the roller shutter, the motor and the obstacle. (The obstacle detection and/or bounce back function can be deactivated)
Automatic anti-freezing function with bounce back function
The motor recognizes a blockage in the upward movement, e.g. when the roller shutter is frozen. Therefore the motor stops, moves back down and releases the hanging.
5 year warranty on faultless performanceTechnical specifications:
TÜV-Bauart approved
Length without bracket: 558 mm
Motor diameter: 35 mm
Power: 145 W
Rated torque: 13 Nm
Maximum load: 29 kg
Cable length: 2.0 m
For shaft diameter: 40 mm, octagonal shaft
Radio frequency: 433,92 MHz
Radio code: G2
Product number: HRF
Built-in receiver, radio code G2
Easy control with various different emitters from heicko
(radio code G2) and via e-Smart Home Gateway (Broadlink)
as well as the everHome CloudBox
Easy mechanical setting of the limits on the motor head with
setting screws
Permanent preservation of the limits in case of power failure
Simple and speedy assembly through clippable motor head
Maintenance-free with a long life span
Thermal overload protection
5 year warranty on faultless performance
Silent running
Product number: 1041-VAR
Product number: VIERKANTLAGER
Brackets for motors with a square shaft reception of 10 mm
Product number: CLIPSLAGER
Brackets for motors with clippable motor heads
Product number: 33913-VAR
for the glazing of plastic windows
depending on the profile
slip-resistant
can be assembled with one hand
Product number: HRSDC
No power connection required! - No qualified electrician is required for the installation!
Simple and inexpensive installation, ideal for renovation
Simple operation with various heicko transmitters (radio protocol G2) and via e-Smart Home Gateway (Broadlink) and the everHome CloudBox
Charging by charger with barrel connector or solar panel possible (not included)
Charging socket with LED status display of the battery. When the battery is low, a low acoustic warning sounds first (only during operation). If there is a further loss of voltage, the LED display (only during operation) starts to flash red. A charge is then required.
Product number: 15811-45
Product number: 15811-90